### 4µW RMS-to-DC Converter in 180nm Technology Process for Biomedical Applications

#### Abstract

This paper presents a low power RMS-to-DC converter for biomedical applications using CMOS transistors. This converter is designed by fewer number of transistors to reduce the power consumption as well as complexity so that only 18 transistors are included to build up the circuit. To make the circuit suitable for biomedical application, CMOS transistors operate in subthreshold region helping with reducing the power dissipation. This circuit takes the advantages of current-mode approach and translinear principle to make the circuit performance suitable for biomedical purposes and better than previous state-of-the-art works. Mathematical operations have been done for better understanding of the circuit operation. To verify the circuit performance, simulations have been done through H-spice in 180nm technology process to validate the analysis and topology of this converter. Based on the simulation results, the circuit has a low power of 4µW, low supply voltage of 0.9V, low relative error of 6%, bandwidth of 3 MHz, and input range of 50nA-450nA.

#### Keywords

#### Full Text:

Abstract#### References

Bellasi, D. E., Bettini, L., Benkeser, C., Burger, T., Huang, Q., and Studer, C. (2013). VLSI design of a monolithic compressive-sensing wideband analog-to-information converter. IEEE Journal of Emerging and Selected Topics in Circuits and Systems, 3(4), pp. 552–565.

Danesh, M., Jayaraj, A., Chandrasekaran, S.T., and Sanyal, A. (2019). Ultra-Low Power Analog Multiplier Based on Translinear Principle. In IEEE International Symposium on Circuits and Systems (ISCAS) in 2019 in Sapporo, Japan, 2019 (pp. 1-5). Japan: IEEE.

Danesh, MH., Dehdast, M., Arekhi, A., and Fard, AE. (2013). A CMOS current-mode low power RMS-to-DC converter. International Journal of Electrical and Electronics Engineering (IJEEE), 3(2), pp. 9-13.

Danesh, MH., Mahmoudian, E., and Fard, AE. (2013). A new current-mode squarer circuit for RMS-to-DC converter. International Journal of Engineering and Innovative Technology (IJEIT), 3(2), pp. 1-4.

de la Cruz-Blas, C. A., Lopez-Martin, A. J., Carlosena, A., and Ramirez-angulo, J. (2005). 1.5v current-mode CMOS true RMS-DC converter based on class-AB transconductors. IEEE Transactions on Circuits and Systems II, 52(7), pp. 376–379.

Frey, D. (2004). Exact analysis of implicit RMS-DC converters. Electron Letters, 40(5), pp. 1455-1456.

Frey, D., Tsividis, Y. P., Efthivoulidis, G., and Krishnapura, N. (2001). Syllabic-companding log domain filters. IEEE Transactions on Circuits and Systems II, 48(4), pp. 329-339.

Ghadami Talkhouncheh, R., Khoshnevis, S. A., Aboutalebi, S. A., and Surakanti, S. R. (2019). Embedding Wireless Intelligent Sensors Based on Compact Measurement for Structural Health Monitoring Using Improved Compressive Sensing-based Data Loss Recovery Algorithm. International Journal for Modern Trends in Science and Technology, 5(7), pp. 27-32.

Haddad, S. A. P., Gieltjes, S., Houben, R., and Serdijn, W. A. (2003). An ultra-low-power dynamic translinear cardiac sense amplifier for pacemakers. In IEEE International Symposium on Circuits Systems (ISCAS) in 2003 in Bangkok, Thailand, 2003 (pp. 37-40). Bangkok: IEEE.

Izadi, V., Abedi, M., and Bolandi, H. (2016). Small Satellite Attitude Control System Designing with four Thruster for Stereo Imaging Mission. In 17th Iranian Conference on Electrical and Electronics Engineering in 2014 in Iran, 2015 (pp. 93-96). Iran: Civilica.

Izadi, V., Abedi, M., and Bolandi, H. (2016). Verification of reaction wheel functional model in HIL test-bed. In 4th International Conference on Control, Instrumentation, and Automation in 2016 in Iran, 2016 (pp. 155-160). IEEE.

Izadi, V., Abedi, M., and Bolandi, H. (2017). Supervisory algorithm based on reaction wheel modelling and spectrum analysis for detection and classification of electromechanical faults. IET Science, Measurement & Technology, 11(8), 1085-1093.

Izadi, V., Abedi, M., Bolandi, H., and Vaghei, G. (2015). Reaction Wheel Functional Modeling Based on Internal Component. In 17th Iranian Conference on Electrical and Electronics Engineering in 2014 in Iran, 2015 (pp. 123-127). Iran: Civilica.

Izadi, V., and Ghasemi, A. (2019). Determination of Roles and Interaction Modes in a Haptic Shared Control Framework. In Proceedings of the ASMA Dynamic Systems and Control Conference in Park City, Utah, 2019 (pp. 1-8). USA: ASME.

Kafe, F., and Ferguson, R. (2005). 0.5 V RMS-to-DC Converter Topologies Suitable for Implantable Biomedical Devices. Journal of Low Power Electronics, 10(3), pp. 373-382.

Lopez-Martin, A. J., and Carlosena, A. (2003). A 1.5 V current-mode CMOS RMS-to-DC converter. Analog Integrated Circuits Signal Process, 36(2), pp. 137–143.

Mitra, D., Zanddizari, H., and Rajan, S. (2018). Improvement of recovery in segmentation-based parallel compressive sensings. In IEEE International Symposium on Signal Processing. and Information Technology in 2018 in Louisville, USA, Louisville, 2018 (pp. 71-76). USA: IEEE.

Mitra, D., Zanddizari, H., and Rajan, S. (2018). Improvement of signal quality during recovery of compressively sensed ECG signals. In IEEE International Symposium Medical Measurement Application in 2018 in Rome, Italy, 2018 (pp. 11-13). Italy: IEEE.

Mulder, J., Serdijn, W. A., Woerd, A. C. V. D., and Roermund, A. H. M. V. (1996). Dynamic translinear RMS-DC converter. Electronics Letters, 32(22), pp. 2067–2068.

Mulder, J., Serdijn, W. A., Woerd, A. C. V. D., and Van Roermund, A. H. M. (1996). Dynamic translinear RMS-DC converter. Electronics letters, 32(22), pp. 2067-2068.

Mulder, J., Woerd, A. C. V. D., Serdijn, W. A., and Roermund, A. H. M. V. (1997). An RMS-DC converter based on the dynamic translinear principle. IEEE Journal of Solid-State Circuits, 32(7), pp. 1146–1150.

Mulder, Woerd, A. C. V. D., Serdijn, W. A., and Van Roermund, A. H. M. (1996). Current-Mode Companding ?x-domain integrator. Electronics Letters. 32(3), pp. 198-199.

Seevinck, E., and Wiegerink, R. J. (1991). Generalized Translinear Circuit Principle. IEEE Journal of Solid-State Circuits, 26(8), pp. 1098-1102.

Toumazou, C., Lidgey, F. J., and D. G. Haigh. (1990). Analog IC Design: The Current Mode Approach. Patter Peregrines Ltd.

Ujan, S., Ghorshi, S., Pourebrahim, M., and Khoshnevis, S. A. (2016). On the Use of Compressive Sensing for Image Enhancement. In 18th International Conference on Computer Modelling and Simulation (UKSim) in 2016 in Cambridge, UK, 2016 (pp. 167-171). UK: IEEE.

Wey, W. S., and Huang, Y. C. (2000). A CMOS delta-sigma true RMS converter. IEEE Journal of Solid-state Circuits, 35(2), pp. 248–257.

Wilson, B. (1990). Recent developments in current conveyors and current mode circuits. IEE Proceedings G – Circuits, Devices, and Systems, 137(2), pp. 63-77.

Zanddizari, H., Rajan, S., and Zarrabi, H. (2018). Increasing the quality of reconstructed signal in compressive sensing utilizing Kronecker technique. Biomedical Engineering Letters, (8)2, pp. 239-248.

### Refbacks

- » —

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Copyright © 2014 Penerbit UTM Press. Universiti Teknologi Malaysia. All rights reserved.

** Mailing Address: **Penerbit UTM Press, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor, Malaysia.